Difference between revisions of "Python v2"

From cod3v

@@ Line 15: / Line 15: @@
 The other sensors work similarly; eg. [[gyroscope sensor py v2]] or [[ultrasonic sensor py v2]] (distance meter) are rather easy to employ.
-== Preliminary things ==
+== Installing ==
-=== SD Card ===
-To set [https://www.ev3dev.org/ ev3dev] running you need a SD card which should be made bootable to [https://www.ev3dev.org/downloads/ ev3dev-stretch]. The installation (copying) can be made using Etcher.
-Connect to your brick. I usually use the USB cable, and it works by plugging.
-See the SD card settings and instructions from [https://www.ev3dev.org/docs/getting-started/ ev3dev/getting-started] page.
+See [[Install ev3dev]]

Anonymous