Install ev3dev

From cod3v
This page contains changes which are not marked for translation.
Other languages:
English • ‎suomi

Ev3dev.org

Download the newest SD card image from https://www.ev3dev.org/downloads/.

Ev3dev website

Balena Etcher

Write the image to the SD card using Balena Etcher or some other software.

Balena Etcher is straightforward to use.

Connection

If Internet connection from the brick is not needed, connecting to the brick is straightforward and easy.

Bluetooth

Establish the Bluetooth connection on computer and brick by pairing. It is very straightforward.

USB cable

Windows will detect your EV3 as a Remote NDIS Compatible Device. . .

Wifi

Visual Studio Code

Install some extensions: the newest ev3dev-browser, and some Python related stuff VS studio needs to install. Connect to the brick by clicking the ev3dev device browser from down left. See the video (embedded below) how to install and set up ev3dev browser. Note that LEGO's MicroPython extension is not needed. We use Ev3dev Python v2.

Connect the brick from down left, then up middle.

The folder in VS Code in be downloaded into VS Code by clicking, and the script can be run from the device browser.

Search for the devices.

Automated launching

Add the file launch.json in the .vscode folder, and copy paste the following script in there

{
    "version": "0.2.0",
    "configurations": [
        {
            "name": "Download and Run",
            "type": "ev3devBrowser",
            "request": "launch",
            "program": "/home/robot/${workspaceRootFolderName}/${relativeFile}"
        }
    ]
}

and the program will be downloaded and run by pressing F5.