SCD-30 and GY-91
From cod3v
Revision as of 07:03, 23 March 2023 by Mol (talk | contribs) (Created page with "== Introduction == Use SCD-30 and GY-91 sensors. First, use Examples -> Wire -> I2C_scanner to find the addresses. <pre> Scanning... I2C device found at address 0x61 ! I2C device found at address 0x68 ! I2C device found at address 0x76 ! done </pre>")
Introduction
Use SCD-30 and GY-91 sensors. First, use Examples -> Wire -> I2C_scanner to find the addresses.
Scanning... I2C device found at address 0x61 ! I2C device found at address 0x68 ! I2C device found at address 0x76 ! done
