Search results

Page title matches

• Vernier Acceleration Sensor
  #REDIRECT [[Vernier Acceleration Sensor Python]]
  48 bytes (5 words) - 09:15, 21 September 2020
• Scd30 co2 sensor
  CO2 sensor by Sensirion. https://sensirion.com/products/catalog/SCD30/ Based on NDIR technology. Temperature and humidity according to the SHT31 sensor on board.
  2 KB (217 words) - 01:17, 23 March 2023
• Gyroscope sensor py v2
  ...t, not during it. Usually, it will be fixed by unplugging and plugging the sensor. The magnetic field has an effect to the sensor. Also, the motors might give anomalities to the readings.
  521 bytes (81 words) - 08:13, 9 June 2020
• Ultrasonic sensor py v2
  [[Category: Sensor]]
  280 bytes (42 words) - 08:14, 9 June 2020
• Vernier Acceleration Sensor Python
  === Sensor Class: Check the modes === Actually, the following codes assume that the color sensor is attached to the port 1. It should be "nxt-analog".
  2 KB (245 words) - 10:20, 21 September 2020
• GY-91 Sensor; Arduino
  Uisng GY-91 sensor with Asukiaa's MPU9250 library. Install the library using Arduino IDE Manag
  2 KB (239 words) - 10:24, 26 November 2022
• Vernier acc-bta sensor
  The Vernier ACC-BTA acceleration sensor together with NXT Adapter. 1) The alignment (or positioning) of the sensor? It doesn't exactly fit the LEGO size standards. . .
  1 KB (210 words) - 01:17, 26 September 2020
• Color sensor readings py v2
  The color sensor in reflected light intensity mode is used. The sensor convention is
  2 KB (315 words) - 13:07, 22 September 2020
• GY-91 Sensor measuring Pressure; Arduino
  * Warm the sensor by putting it
  2 KB (303 words) - 07:05, 23 March 2023
• Color sensor readings py v2/fi
  #Sensor port convention: from ev3dev2.sensor.lego import ColorSensor
  2 KB (243 words) - 06:36, 23 September 2020
• Color sensor readings py v2/en
  The color sensor in reflected light intensity mode is used. The sensor convention is
  2 KB (267 words) - 13:20, 22 September 2020

Page text matches

• Gyroscope sensor py v2
  ...t, not during it. Usually, it will be fixed by unplugging and plugging the sensor. The magnetic field has an effect to the sensor. Also, the motors might give anomalities to the readings.
  521 bytes (81 words) - 08:13, 9 June 2020
• I2c scanner
  I have connected the GY-91 sensor which has * MPU 9250 sensor and
  811 bytes (127 words) - 11:09, 26 November 2022
• Python v2
  *[[Color sensor readings py v2]] ...her sensors work similarly; eg. [[gyroscope sensor py v2]] or [[ultrasonic sensor py v2]] (distance meter) are rather easy to employ.
  572 bytes (86 words) - 12:05, 22 September 2020
• Vernier Acceleration Sensor Python
  === Sensor Class: Check the modes === Actually, the following codes assume that the color sensor is attached to the port 1. It should be "nxt-analog".
  2 KB (245 words) - 10:20, 21 September 2020
• Stop at line py v2
  ...nstrate forwarding moving and color sensor. The robot stops when the color sensor finds a darker area. The color sensor is needed.
  2 KB (270 words) - 08:10, 9 June 2020
• Vernier Acceleration Sensor
  #REDIRECT [[Vernier Acceleration Sensor Python]]
  48 bytes (5 words) - 09:15, 21 September 2020
• Line follower algorithm
  The color sensor is used to read the color of line and surroundings. ...ithm turns the robot to right if the sensor sees white, and to left if the sensor is on the black. Or vice versa. The algorithm is easy to program using only
  2 KB (336 words) - 10:49, 25 October 2020
• How to use gyroscope/en
  The gyroscope sensor is used. ...ing, the easiest method to make it work properly is to unplug and plug the sensor again. Usually it works on the first replugging.
  2 KB (353 words) - 10:34, 15 September 2020
• Scd30 co2 sensor
  CO2 sensor by Sensirion. https://sensirion.com/products/catalog/SCD30/ Based on NDIR technology. Temperature and humidity according to the SHT31 sensor on board.
  2 KB (217 words) - 01:17, 23 March 2023
• Stop at given length from the wall/en
  ...ant to stop the robot if it sees an obstacle. The ultrasonic (or infrared) sensor is a suitable tool for that. The ultrasonic (distance) sensor is used. The sensor is attached to port number 4.
  2 KB (286 words) - 09:31, 15 September 2020
• How to use gyroscope
  The gyroscope sensor is used. ...ing, the easiest method to make it work properly is to unplug and plug the sensor again. Usually it works on the first replugging.
  2 KB (399 words) - 10:34, 15 September 2020
• Stop the robot after the third line/en
  ...FIRST Lego League (FLL) or in Rescue competitions. The problem is that the sensor reads continuous data, and the simplest solutions wont work. One color sensor is needed.
  3 KB (500 words) - 10:29, 15 September 2020
• Proportional coding
  The line follower uses color sensor and the gyroscope code uses gyroscope to drive straight. ...ne/en|follows the line]], or actually the border of the line. If the light sensor reads too small values (dark), the robot will turn to other side. If the va
  3 KB (433 words) - 11:39, 16 October 2020
• Stop at given length from the wall
  ...ant to stop the robot if it sees an obstacle. The ultrasonic (or infrared) sensor is a suitable tool for that. The ultrasonic (distance) sensor is used. The sensor is attached to port number 4.
  2 KB (322 words) - 09:17, 15 September 2020
• Color sensor readings py v2/en
  The color sensor in reflected light intensity mode is used. The sensor convention is
  2 KB (267 words) - 13:20, 22 September 2020
• Stop the robot after the third line
  ...FIRST Lego League (FLL) or in Rescue competitions. The problem is that the sensor reads continuous data, and the simplest solutions wont work. One color sensor is needed.
  3 KB (564 words) - 10:11, 15 September 2020
• Color sensor readings py v2
  The color sensor in reflected light intensity mode is used. The sensor convention is
  2 KB (315 words) - 13:07, 22 September 2020
• Follow a line/en
  One light sensor or color sensor is needed. ...using black and light reflectances, or by calibrating the values from the sensor. See the linked page for more information.
  4 KB (636 words) - 12:34, 14 September 2020
• Online thermometer with local backup
  ...://www.adafruit.com/product/393 AM2302 (wired DHT22)] temperature-humidity sensor with Raspberry Pi. Pi is set up to measure temperature and humidity every < === AM2302 Sensor ===
  2 KB (309 words) - 11:44, 22 August 2021
• Ultrasonic sensor py v2
  [[Category: Sensor]]
  280 bytes (42 words) - 08:14, 9 June 2020

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)