DIY: Percevarence grass cutter

From cod3v

Introduction

Make a mower that resembles Percevarence: Six wheels with rocker-boogie suspension.

Designed for slow motion (10 cm/s).

Theory

Naming conventions

  • 4WD or 4x4: Four wheel drive.
  • AWD: All wheed drive
  • 6x4: three axles, two of which provide torque to two axle ends each.
  • 6WD or 6x6. H-drive.

https://en.wikipedia.org/wiki/Steering; see eg Ackermann steering.

Differential steering. Turning radius. Differential wheeled robots. Kinematics of differential drive robots. https://rossum.sourceforge.net/papers/DiffSteer/DiffSteer.html

https://thef1clan.com/2020/09/21/vehicle-dynamics-the-kinematic-bicycle-model/

The kinematics of mobile robots is clearly described in Robotics.SE article https://robotics.stackexchange.com/questions/8911/how-to-find-kinematics-of-differential-drive-caster-robot

Mathworks www site contains a good and simple reference for mobile robot kinematics equations, see https://www.mathworks.com/help/robotics/ug/mobile-robot-kinematics-equations.html

Skid steer dynamics is considered in the following paper https://www.joydeepb.com/Publications/icra2019_skid_steer.pdf

A detailed description of six wheeled robots made using Arduino on Instructables https://www.instructables.com/Remote-Controlled-6WD-All-Terrain-Robot/

Rocker-bogie

https://en.wikipedia.org/wiki/Rocker-bogie

The tension, forces on the single joint?

Differential Joint

The two rockers connect to each other and to the body through a differential. It keeps the body level. When one rocker goes up, the other rocker goes down, and the body angle is halfway between the angles of the two rockers.

Differential gearbox

"Dynamic Rocker-Boogie"

Stress and tension (different parameters)

Approximate the stress and forces on the different parts of the rocker--boogie joints.